Skip to main content
RespawnDailyExplore

Promo Codes & Rewards

[Zenless Zone Zero] Region-locked codes — is there a workaround?

Adding my findings in case they help someone. It seems to depend heavily on region, which nobody mentions anywhere.

15 replies822 viewsStarted 16 May 2026Last activity 28 Jun 2026
  • codes
  • eligibility
  1. Driftspark
    DriftsparkOriginal post

    @driftspark44 · 16 May 2026, 02:43

    #1

    Adding my findings in case they help someone. It seems to depend heavily on region, which nobody mentions anywhere.

    Once it clicked, it felt obvious, but getting there took far longer than it should have. Happy to be told I am overthinking it.

  2. Damian Piszczek

    @damianpiszczek · 20 May 2026, 15:44

    #2

    Adding to the above: the wiki number is theoretical; real results are always a bit lower.

    Worth a shot before anything drastic.

  3. Lunarpulse

    @lunarpulse · 22 May 2026, 07:20

    #3

    I went through this last month. nine times out of ten it is a driver or a background process, not the thing you suspect.

  4. Aria V.

    @aria_v · 26 May 2026, 06:58

    #4

    Counterpoint: give it a clean reinstall before assuming the hardware is at fault.

  5. Wraithloop

    @wraithloop · 29 May 2026, 11:52

    #5

    Only partly related, but temperature is the usual culprit when performance degrades over a session.

  6. Pilot KX

    @pilot_kx · 31 May 2026, 09:53

    #6

    Had the exact same issue. this changed for me after the last patch, so older threads may steer you wrong.

    That fixed it for me, at least.

  7. Zoe T.

    @zoe_t · 1 Jun 2026, 03:36

    #7

    Worth checking first: ignore the loudest advice; the boring answer is usually the correct one here.

  8. Deniz F.

    @deniz_f25 · 2 Jun 2026, 14:13

    #8

    Quick correction to the above: the safe move is the reversible one — you can always undo it if it makes things worse.

  9. Solarzen

    @solarzen5 · 4 Jun 2026, 15:00

    #9

    From experience, measure before and after, otherwise you are just guessing whether it helped.

    Report back once you have tried it.

  10. Leo N.

    @leo_n · 9 Jun 2026, 09:31

    #10

    Short version: ignore the loudest advice; the boring answer is usually the correct one here.

    Good luck, it is a common snag.

  11. Arclynx

    @arclynx · 10 Jun 2026, 16:23

    #11

    Slightly different take — the wiki number is theoretical; real results are always a bit lower.

    Good luck, it is a common snag.

  12. Maya F.

    @mayaf · 15 Jun 2026, 19:30

    #12

    Speaking as someone who got it wrong initially, temperature is the usual culprit when performance degrades over a session.

  13. Aya H.

    @aya_h10 · 18 Jun 2026, 23:24

    #13

    Counterpoint: temperature is the usual culprit when performance degrades over a session.

    Report back once you have tried it.

  14. Driftsol

    @driftsol · 21 Jun 2026, 00:20

    #14

    Same boat here. the community guide covers this better than I can, but the summary is to prioritise the basics first.

  15. Halcyonkite

    @halcyonkite · 24 Jun 2026, 14:21

    #15

    Adding to the above: the trick is to change one thing at a time and actually note the result before touching anything else.

  16. Noa E.

    @noa_e · 28 Jun 2026, 02:15

    #16

    Not the answer you want, but nine times out of ten it is a driver or a background process, not the thing you suspect.

Be specific and civil. Referral links are removed automatically.